We offer to buy masking tape for painting of good quality. All you have to do is choose its width. Brown rolls consist of corrugated paper, on the inner part of which there is a thin layer of rubber glue.
The tape forms a tight fit. If there is a high-quality connection with the surface, it can be removed without the appearance of joints and glue residues, which speeds up the work. But if painting, priming, varnishing, finishing works in the premises will not be carried out immediately, it is better to buy another tape.
Corrugated (crepe) outer texture is much better than smooth, because it keeps primer, varnish or paint from seeping into unused places. You can tear off the required length of masking tape with your hands, without the help of scissors. The transverse tear does not require effort, and in the longitudinal direction the tape is protected from stretching and damage.
To fix the covering films, we advise you to buy a tape with a width of 0.36 m or 0.48 m. For the purpose of marking the surface, buy a product with a width of 0.18m and 0.24m. The material has low surface absorption, but does not get wet through.
The use of the product is permissible at a temperature not higher than + 110˚С. The material retains its adhesive ability even with temperature changes within positive values. Scope of use: painting works in the automotive industry, decoration of walls and ceilings in premises.
A small life hack: in order not to be nervous the next time you separate the tape from the roll, stick a small coin on the free edge after use.
Width and length:
18 mm x 35 m,
24 mm x 35 m,
36 mm x 35 m,
48 mm x 35 m.
For professional use only.